Tribological analysis of squeeze stir cast recycled aluminum MMC'S

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

In this work, squeeze stir casting was used to produce recycled Aluminum Metal Matrix Composites (MMC's) plates. Scrap Aluminum Alloy Wheel (SAAW) was used as a matrix and alumina as reinforcement. The produced recycled MMC plate was subjected to abrasive and sliding wear using a Two-body abrasion tester and Pin-on-Disc tester with a load of 20 N. To improve the wear resistance of the recycled MMC, graphite (1% to 4%) and SiC (3% and 6%) were added to alumina, and the results were compared. The results showed that the addition of graphite and SiC to alumina decreased the wear rate and frictional forces compared to using alumina alone as reinforcements. Also, wear rates and frictional forces further reduced by increasing the percentage of graphite to 4%, whereas increasing the SiC content increased the wear. Scanning Electron Microscopy (SEM) analysis and microstructure analysis was conducted on these samples. These results confirmed that graphite and alumina exhibited better bonding to the SAAW matrix than SiC. Since this recycled Aluminum MMC achieves a cleaner production process, it has great industrial potential, including applications in the piping industry, and its tribological properties can be boosted using graphite (4% by wt.) with alumina (5% by wt.) as reinforcements.

Original languageEnglish
Title of host publicationMaterials and Fabrication
PublisherAmerican Society of Mechanical Engineers (ASME)
ISBN (Electronic)9780791885345
DOIs
Publication statusPublished - 2021
EventASME 2021 Pressure Vessels and Piping Conference, PVP 2021 - Virtual, Online
Duration: Jul 13 2021Jul 15 2021

Publication series

NameAmerican Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP
Volume4
ISSN (Print)0277-027X

Conference

ConferenceASME 2021 Pressure Vessels and Piping Conference, PVP 2021
CityVirtual, Online
Period7/13/217/15/21

Keywords

  • Abrasive wear
  • Graphite, alumina
  • Recycled Aluminum Metal Matrix Composites
  • Scrap Aluminum Alloy Wheels (SAAW)
  • Sliding wear

ASJC Scopus subject areas

  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Tribological analysis of squeeze stir cast recycled aluminum MMC'S'. Together they form a unique fingerprint.

Cite this