Selective hydrogen gas sensor using CuFe 2 O 4 nanoparticle based thin film

Mohammad Abu Haija, Ahmad I. Ayesh, Sadiqa Ahmed, Marios S. Katsiotis

Research output: Contribution to journalArticlepeer-review

61 Citations (Scopus)

Abstract

Hydrogen gas sensors based on CuFe 2 O 4 nanoparticle thin films are presented in this work. Each gas sensor was prepared by depositing CuFe 2 O 4 thin film on a glass substrate by dc sputtering inside a high vacuum chamber. Argon inert gas was used to sputter the material from a composite sputtering target. Interdigitated metal electrodes were deposited on top of the thin films by thermal evaporation and shadow masking. The produced sensors were tested against hydrogen, hydrogen sulfide, and ethylene gases where they were found to be selective for hydrogen. The sensitivity of the produced sensors was maximum for hydrogen gas at 50 °C. In addition, the produced sensors exhibit linear response signal for hydrogen gas with concentrations up to 5%. Those sensors have potential to be used for industrial applications because of their low power requirement, functionality at low temperatures, and low production cost.

Original languageEnglish
Pages (from-to)443-447
Number of pages5
JournalApplied Surface Science
Volume369
DOIs
Publication statusPublished - 2016

Keywords

  • CuFe O
  • Hydrogen sensor
  • Nanoparticle
  • Thin film

ASJC Scopus subject areas

  • Chemistry(all)
  • Condensed Matter Physics
  • Physics and Astronomy(all)
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films

Fingerprint

Dive into the research topics of 'Selective hydrogen gas sensor using CuFe 2 O 4 nanoparticle based thin film'. Together they form a unique fingerprint.

Cite this