Experimental investigation of springback in air bending process

Aysha Alhammadi, Hafsa Rafique, Meera Alkaabi, Jaber Abu Qudeiri

Research output: Contribution to journalConference articlepeer-review

1 Citation (Scopus)

Abstract

Bending processes is one of the important processes in sheet metal forming. One of the challenge that faces the air bending process is springback, which happens due to the elastic recovery during unloading stage. An accurate analysis of springback during the bending process is crucial to achieve a required bend angle. This paper will investigate the springback experimentally by changing many parameters such as tested material, die opening, thickness, etc. and finding its effect on the value of springback. Additionally, the paper will investigate the effect of loading time at the end of loading stage on the springback by proposing a multistage bending technique (MBT). In MBT, the loading will stop during loading stage just before the end of this stage and it will restart again shortly after. In this study, three sheet metals with different thickness will be examined, namely stainless steel, aluminium and brass. Artificial neural network (ANN) will be utilized to develop a prediction model to predict springback based on the experimental results.

Original languageEnglish
Article number012021
JournalIOP Conference Series: Materials Science and Engineering
Volume323
Issue number1
DOIs
Publication statusPublished - Mar 2 2018
Event1st International Conference on Functional Materials and Chemical Engineering, ICFMCE 2017 - Dubai, United Arab Emirates
Duration: Nov 24 2017Nov 26 2017

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint

Dive into the research topics of 'Experimental investigation of springback in air bending process'. Together they form a unique fingerprint.

Cite this