Effect of engine parameters and gaseous fuel type on the cyclic variability of dual fuel engines

Research output: Contribution to journalArticlepeer-review

100 Citations (Scopus)

Abstract

This paper presents an analysis of the cycle-to-cycle combustion variation as reflected in the combustion pressure data of a single cylinder, naturally aspirated, four stroke, Ricardo E6 engine converted to run as dual fuel engine on diesel and gaseous fuel of LPG or methane. A measuring set-up consisting of a piezo-electric pressure transducer with charge amplifier and fast data acquisition card installed on an IBM microcomputer was used to gather the data of up to 1200 consecutive combustion cycles of the cylinder under various combination of engine operating and design parameters. These parameters included type of gaseous fuel, engine load, compression ratio, pilot fuel injection timing, pilot fuel mass, and engine speed. The data for each operating conditions were analyzed for the maximum pressure, the maximum rate of pressure rise - representing the combustion noise, and indicated mean effective pressure. The cycle-to-cycle variation is expressed as the mean value, standard deviation, and coefficient of variation of these three parameters. It was found that the type of gaseous fuel and engine operating and design parameters affected the combustion noise and its cyclic variation and these effects have been presented.

Original languageEnglish
Pages (from-to)961-971
Number of pages11
JournalFuel
Volume84
Issue number7-8
DOIs
Publication statusPublished - May 2005

Keywords

  • Combustion noise
  • Cyclic variability
  • Dual fuel engine
  • LPG
  • Methane

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Fuel Technology
  • Energy Engineering and Power Technology
  • Organic Chemistry

Fingerprint

Dive into the research topics of 'Effect of engine parameters and gaseous fuel type on the cyclic variability of dual fuel engines'. Together they form a unique fingerprint.

Cite this