Dynamic simulation of a position-controlled electrohydraulic system using EASY5

Moustafa A. Fadel, Gary W. Krutz, Hartono Sumali, Harvey White

Research output: Contribution to journalConference articlepeer-review

Abstract

A servovalve - controlled hydraulic motor - driven positioning system was built. The hydraulic system was modeled and simulated using EASY5 software which had predefined hydraulic components models in addition to the ability of defining new ones. EASY5 model made it possible to study the dynamic behavior of the system under varied conditions of entrained air, motor displacement, motor leakage, and mass changes. Different systems components were tested in order to have the required data needed to build the final model. Pump flow rate, motor leakage, servovalve leakage, and slide table friction were experimentally measured. The slide table dynamic model was proposed and the performance data was measured. Eigenvalue sensitivity analysis showed that fluid line between the hydraulic motor and the servovalve is the most influential factor on system stability. The results showed that using 0.1in3 displacement motor reduced total time although it increased time delay compared with the 0.15in3 and 0.3in3 displacement Motors. On the other hand using shorter conductor reduced the total time compared with the longer lines. Also, increasing tubing length increased the pressure in motor outlet port.

Original languageEnglish
JournalSAE Technical Papers
DOIs
Publication statusPublished - Jan 1 1999
Externally publishedYes
EventInternational Off-Highway and Powerplant Congress and Exposition - Indianapolis, IN, United States
Duration: Sep 13 1999Sep 15 1999

ASJC Scopus subject areas

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering

Fingerprint

Dive into the research topics of 'Dynamic simulation of a position-controlled electrohydraulic system using EASY5'. Together they form a unique fingerprint.

Cite this