Assessment of electrocoagulation for the treatment of petroleum refinery wastewater

Muftah H. El-Naas, Sulaiman Al-Zuhair, Amal Al-Lobaney, Souzan Makhlouf

Research output: Contribution to journalArticlepeer-review

202 Citations (Scopus)

Abstract

Batch electrocoagulation experiments were carried out to evaluate the removal of sulfate and COD from petroleum refinery wastewater using three types of electrodes: aluminum, stainless steel, and iron. The effects of current density, electrode arrangement, electrolysis time, initial pH, and temperature were investigated for two wastewater samples with different concentrations of COD and sulfate. The experimental results indicated that the utilization of aluminum, as anode and cathode, was by far the most efficient arrangement in the reduction of both the contaminants. The treatment process was found to be largely affected by the current density and the initial composition of the wastewater. Although electrocoagulation was found to be most effective at 25°C and a pH of 8, the influence of these two parameters on the removal rate was not significant. The results demonstrated the technical feasibility of electrocoagulation as a possible and reliable technique for the pretreatment of heavily contaminated petroleum refinery wastewater.

Original languageEnglish
Pages (from-to)180-185
Number of pages6
JournalJournal of Environmental Management
Volume91
Issue number1
DOIs
Publication statusPublished - Oct 2009

Keywords

  • COD
  • Electrocoagulation
  • Petroleum refinery
  • Sulfate
  • Wastewater treatment

ASJC Scopus subject areas

  • Environmental Engineering
  • Waste Management and Disposal
  • Management, Monitoring, Policy and Law

Fingerprint

Dive into the research topics of 'Assessment of electrocoagulation for the treatment of petroleum refinery wastewater'. Together they form a unique fingerprint.

Cite this